MSDS

Section 6 - Spill or Leak Procedures
Spill Procedures:
Floors will become slippery. Avoid walking in product and ventilate
area. Mop up or otherwise absorb and hold disposal. Avoid discharge
to sewer or open waterways.
Section 7 - Handling And Storage:
Precautions To Be Taken In Handling And Storage:
Store in a cool dry area in a closed
container. Avoid temperatures above 350F.
KEEP OUT OF THE REACH OF CHILDREN
Section 8 - Special Protection Information
Respiratory Protection:
No special requirements
Ventilation:
Normal ventilation.
Protective Gloves:
Rubber, Neoprene, Plastic recommended when excessive
contact is expected.
Eye Protection
Safety glasses or eye goggles recommended when excessive
contact is expected.
Other Protection:
Not Necessary if product is used as directed.
Hygienic Practices:
Wash thoroughly after handling
Section 9 - Physical Data
Appearance:
Opaque
Color:
White
Odor:
Acrylic
Physical State:
Liquid
Solubility In Water:
Miscible in water
pH:
7.8 - 8.8
Boiling Point:
212F
Evaporation Rate: (vs. H20)
<1
Specific Gravity: (H20=1)
1.03
Relative Density (lbs/gal.)
8.6
Vapor Density: (Air=1)
Like Water
Vapor Pressure (mmHg):
Not available
Evaporation Rate:
(vs. Butyl Acetate)
<1
Section 10 - Reactivity Data
Stability:
Stable
Hazardous Polymerization:
None
Hazardous Decomposition:
Not known
Incompatibility:
Strong oxidizing agents
Material Name: Quick Shine - Floor Finish (Designed for the Environment) Page 2 of 4