Installation Manual
BI 7.2.3-44
June 2018, Rev 4
I. IMPORTANT SAFETY INSTRUCTIONS
1
Read all instructions and warning labels provided with the product prior to installation.
This product has been designed and tested to national safety requirements to ensure your personal safety. Improper use may
result in potential electric shock. To reduce the risk of personal injury, read and follow all instructions and warnings in this
installation manual.
I.I SAVETHESEINSTRUCTIONS
This manual contains important instructions that shall be followed during installation and maintenance of the system.
This manual should be stored near the product’s installation and must be available at all times. This product is intended
for operation in an environment having a maxium temperature of 75°C.
I.II Safety Callouts
There are important safety information and instructions in specially formatted callouts throughout this document.
The callouts along with their general use instructions are shown below.
Electrical Voltage
May Be Present
DANGER
Indicates that a failure to comply will
result in personal injury, death or
property damage.
CAUTION
Indicates a potentially hazardous
situation which if not avoided could
result in minor or moderate injury or
property damage. It may also be used
to alert against unsafe practices.
NOTES
Indicates information that is very
important for optimal system operation
and must be followed closely.
WARNING
Indicates that a failure to comply could
result in personal injury, death or
property damage.