QRail Installation

BI 7.2.3-46
Jul-2019, Rev 4.2
15
3.3 Mounting Aids and Required Tools
In addition to standard hand tools, you will need the following tools:

5 mm Allen key / 5 mm Allen key power driver

13 mm hex socket / 13 mm box or open-end wrench

7/16" (11mm) box end wrench

Drill driver

Metric socket set

Torque wrench

Reciprocating saw and/or band saw

Chalk line

Spirit level

Tape measure
Please adhere to the mounting steps listed and be sure to follow the safety instructions. DO NOT use an impact gun.
3.4 Fastener Torque Settings
Proper torque is important to a safe and secure installation. Please refer to Section 2.2 QRail Components for recommended
torque values for the various fasteners in the QRail system. Unless specifically directed otherwise, these values should be
used for all metal-to-metal attachments.
WARNING
DO NOT use an impact gun
on QRail components.