QSkirt Installation Manual For use with QRail™ Racking System BI 7.2.
QSkirt Installation Instructions Installation Tools Required: tape measure, 1/2 inch socket driver, Philips head screwdriver. 1 Lay out the skirt at the bottom of the array and complete any splicing if necessary. NOTE: clamps cannot be installed over the splice so be sure to account for this in layout planning. 4 To attach, insert the QClick on the End Clamp at a slight angle into the channel on the QSkirt. While holding firmly in place, rock the QClick until it clicks into place.
ITEM NO. DESCRIPTION QTY. 1 EXTRUSION, QSKIRT, 168", ALUMINUM, BLACK 1 1 DETAIL C SCALE 1 : 4 C 3.879 2.873 168.0 TITLE: QMR-QS: QSKIRT UNLESS OTHERWISE SPECIFIED: PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED. DO NOT SCALE DRAWING COPYRIGHT © 2016 QUICK MOUNT PV 4 5 A DRAWN BY: DATE: WEIGHT: 125.
ITEM NO. DESCRIPTION QTY. 1 QSPLICE, QSKIRT, 4", AL, MILL 1 2 SCREW, SELF-DRILLING, BSD, PHILLIPS HEAD, 12-14 X 3/4", 18-8SS 2 1 2 QSKIRT NOT INCLUDED TITLE: QMR-QSS: SPLICE, QSKIRT UNLESS OTHERWISE SPECIFIED: PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED.
