QRail System UL System Fire Class Rating - Low Slope Roofs

8431 Murphy Drive
Middleton, WI 53562 USA
Telephone: [phone]
Facsimile: 608.831.9279
www.intertek.com
Test Verification of Conformity
This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense
or damage occasioned by the use of this Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its
marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test/inspection results
referenced in this Verification are relevant only to the sample tested/inspected. This Verification by itself does not imply that the material, product, or service is or has ever been
under an Intertek certification program.
GFT-OP-11a (24-MAR-2014)
Signature:
Name:
Nalini Mandadi
Position:
Project Engineer
Date:
11/14/2014
In the basis of the tests undertaken, the sample(s) of the below product have been found to comply with the requirements of
the referenced specifications at the time the tests were carried out.
Applicant Name & Address:
QuickMount PV
2700 Mitchell Drive, Bldg. 2
Walnut Creek, CA 94598
Product Description:
Symmetrical Mount for Low Slope Roof Applications
Ratings & Principle
Characteristics:
Fire Class Resistance Rating:
Class A Fire Rated for Low Slope applications when using Type 1 or 2 listed photovoltaic
modules. This system was evaluated with a 5” gap between the bottom of the module and the
roof’s surface. Per Section 31.2.2.1 of UL 1703 this product can be installed with any gap stated in
the manufacturer’s installation instructions. A perimeter guard is optional.
Models:
QRail
Brand Name:
QuickMount PV
Relevant Standards:
UL 2703 (Section 15.2 and 15.3) Standard for Safety Mounting Systems, Mounting Devices,
Clamping/Retention Devices with Flat-Plate Photovoltaic Modules and Panels, First Edition dated
Jan. 28, 2015 Referencing UL1703 Third Edition revision date September 2017,
(Section 31.2) Standard for Safety for Flat-Plate Photovoltaic Modules and Panels.
Verification Issuing Office:
Intertek Testing Services NA, Inc.
8431 Murphy Drive
Middleton, WI 53562
Date of Tests:
10/19/2018 – 11/19/2018
Test Report Number(s):
103675439MID-009r1
This verification is part of the full test report(s) and should be read in conjunction with them. This report does not automatically imply
product certification.
Completed by:
Christopher Zimbrich
Reviewed by:
Chad Naggs
Title:
Technician I – Fire Resistance
Title:
Technical Team Lead – Fire Resistance
Signature:
Signature:
Date:
01/22/2019
Date:
01/22/2019