2020 Installation Guide

BI 7.2.3-46
Feb-2021, Rev 14
BI 7.2.3-46
Feb-2021, Rev 14
14
3.3 Mounting Aids and Required Tools
In addition to standard hand tools, you will need the following tools:
•
" or 13mm socket / " or 13mm box or open-end wrench
•
Drill driver
•
Torque wrench (0-200 in-lbs.)
•
Reciprocating saw and/or band saw
•
Chalk line
•
Tape measure
•
5 mm Allen key / 5 mm Allen key power driver (for fixed end clamps only)
Please adhere to the mounting steps listed and be sure to follow the safety instructions. DO NOT use an impact gun.
3.4 Fastener Torque Settings
Proper torque is important to a safe and secure installation. Please refer to Section 2.2 QRail Components for recommended
torque values for the various fasteners in the QRail system. Unless specifically directed otherwise, these values should be
used for all metal-to-metal attachments.
WARNING
DO NOT use an impact gun
on QRail components.