2020 Installation Guide

BI 7.2.3-46
Feb-2021, Rev 14
9
All QRails can be spliced into longer units by means of the QRail Internal
QSplice (Image 2.4.11). The bonding splice joins the two rail segments
mechanically and electrically for the Standard and Light rails.
The Internal QSplice has a bonding plate that pierces any paint or aluminum
oxide layer on the rails. This forms an electrical bond from rail-to-rail through
the bonding plate. The splice body is electrically bonded through the bonding
Rail Bonding with Internal QSplice
Image 2.4.11 QRail Internal QSplice
QRail
Internal
QSplice
body
Bonding plate
Rivet