QMCPC A Installation Guide

Conduit Penetration Flashing QMCPC
1
2
12.00
12.00
5.15
6.00
4.28
2.67
THIS EDGE TOWARDS ROOF RIDGE
1.82
TOP OF
FLASHING
2.69
A
DETAIL A
SCALE 1 : 2
CUT HERE FOR 1" CONDUIT
CUT HERE FOR 3/4" CONDUIT
TOP ID FOR 1/2" CONDUIT
APPLY EPDM COMPATIBLE SEALANT WHERE
CONDUIT CONTACTS COUNTER FLASHING.
ITEM NO. DESCRIPTION QTY.
1
FLASHING, SPUN CONE, 12" X 12" X .032" -
3003 AL, MILL
1
2
COUNTER FLASHING, CONDUIT, 1/2", 3/4",
1", EPDM RUBBER
1
1
DO NOT SCALE DRAWING
SHEET 1 OF 2
10/26/2012
RAD
SCALE: 1:4 WEIGHT:
REV
A
SIZE
TITLE:
DATE:
DRAWN BY:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
1/8
TWO PLACE DECIMAL
.18
THREE PLACE DECIMAL
.125
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED.
5
4
3
2
1
UNLESS OTHERWISE SPECIFIED:
0.53
QMCPC-CONDUIT PENETRATION
FLASHING-COMP
FLASHING, SPUN CONE, 12"x12"
COUNTER FLASHING, TRIMMED
FOR EMT CONDUIT (1/2", 3/4", 1" )
SECURE CONDUIT TO RAFTER PER
LOCAL BUILDING CODE
(CLIPS NOT INCLUDED)
EMT CONDUIT, 1/2", 3/4", 1"
(NOT INCLUDED)
1
DO NOT SCALE DRAWING
SHEET 2 OF 2
10/26/2012
RAD
SCALE: 1:4 WEIGHT:
REV
A
SIZE
TITLE:
DATE:
DRAWN BY:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
1/8
TWO PLACE DECIMAL
.18
THREE PLACE DECIMAL
.125
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QUICK MOUNT PV. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN PERMISSION OF QUICK MOUNT PV IS PROHIBITED.
5
4
3
2
1
UNLESS OTHERWISE SPECIFIED:
NA
QMCPC-CONDUIT PENETRATION
FLASHING-COMP
Full-sized drawing available at:
quickmountpv.com/pdfs/ Conduit-Penetration-Flashing-Drawing.pdf
Drawing 2
Drawing 1
Apr-2013, Rev 4
BI 7.2.3-22