Low Slope Roofs Flashing Guidelines

Jan-2017, Rev 3BI 7.2.3-5_1

925-478-8269 | www.quickmountpv.com | info@quickmountpv.com

2700 Mitchell Dr. | Walnut Creek, CA 94598

Soprema ALSAN Flashing Installation Instructions

Find more information at www.soprema.us.

Clear away all debris around the mount. Apply roof compatible sealant in a

square around the mount where the

flashing will be placed.

Apply a base coat of ALSAN over the

flashing, overlapping the edge of the

flashing by at least 4".

Apply a bead of EPDM approved

sealant where flashing meets post

and install EPDM counter flashing

collar.

Embed four pieces of fleece fabric scrim

around the flashing, overlapping the

edge of the flashing by 4".

Add additional ALSAN flashing between

layers where fleece skrim overlaps.

Place flashing over mount and nail

down at each corner of the flashing.

Scu up the surface of the flashing with

sandpaper.

Apply a thin top coat of ALSAN flashing

over entire fleeced area. Let dry for four

hours.