User guide

Bella Barista
Nene Court, The Embankment,Wellingborough, Northants, NN8 1LD
Tel: [phone]
e-mail: [e-mail]
© Bella Barista Page 4 of 12
Preparing the machine for use
There is nothing to remove, peel off, portafilter baskets to assemble or any thing else to do
other than lift the machine onto the counter, wash the cold water tank, fill it with filtered water.
Flushing the machine before 1
st
use
I included this as I never like the idea of using a machine without thoroughly flushing it
through, especially considering that the machine may have stale water from factory testing
(many months old), or manufacturing residues.
Inside the Andreja Premium
Internal build quality is good with very high quality components. Components are well
positioned and neatly assembled.
Servicing this machine will be very easy; strip down is fast and simple with little potential for
error. Component quality is (as you would expect very high), and the design excellent with
easy access to internal components. The case is difficult to remove for the inexperienced
home user and I would not recommend attempting this, as damage to the machine could
result.
Key features
Item/Description Picture Comments
Don't like cheaper puffy plastic label One of my pet hates, I don’t
want a steel machine with a
plastic label. I want a metal
badge!
hole to adjust the thermostat and It’s
protective cover.
One of the improvements to this machine,
include the ability to adjust the
pressurestat (for boiler
pressure/temperature) without removing
the case.
Never adjust the pressurestat
without unplugging the machine
from the mains (not just
switching it off!)
A picture through that little
hole, the CEME pressurestat
is quite a way down (further
than it looks) and I noticed a
little red protective cap
covering the adjustment
screw. To remove that you
would need to remove the
case!
I don’t know whether you can
leave the protective cap off or
not for future adjustments.
Bella Barista will have
checked the machine though,
so no adjustments will be
necessary.
After case removal some sharp edges
can be exposed.
This is quite common with espresso machines and care
should be taken.