Instructions / Assembly

QuickJack Portable Car Jack 4 P/N 5900959 — Rev. H — May 2018
IMPORTANT!
P
LEASE READ
Do not raise the QuickJack Frames to full
extended height with no Vehicle load!
One popular way to get familiar with the operator controls of your QuickJack is to raise and
lower the QuickJack Frames a few times with no Vehicle on them.
There is nothing wrong with this. However, if you do it, make sure you do not raise the
Frames to full height with no load; in fact, just raise them to the First Locking Position.
Why are we asking you to do it this way? Because your QuickJack Frames can become stuck
at full rise with no load. They are designed and engineered to work with the weight of a
Vehicle. Never raise the Frames to full height with no Vehicle on them.
And since we have your attention…
Do not remove your Vehicle’s tires then lower the QuickJack to the ground.
The QuickJack requires space between the ground and your Vehicle to build up enough force
to raise a Vehicle. It cannot raise a full load from a completely flat starting position.
Do
Not
Do
This!
This is not a problem in normal operation, as the Vehicles you want to raise are being held well
above the ground by their tires. The problem generally happens when people lower the
QuickJack to a completely flat position with the Vehicle’s tires removed.
What do you do if either of these problems happens to you? Refer to Troubleshooting.