Instructions / Assembly

QuickJack Portable Car Jack 38 P/N 5900959 — Rev. H — May 2018
Maintenance
⚠ WARNING: Remove power from your QuickJack before performing any maintenance!
To maintain your QuickJack:
• Keep all bolts tight. Check them periodically.
• Keep all QuickJack components clean.
• Daily: Make a visual inspection of all moving parts and check for damage or excessive wear.
Replace any damaged or worn parts before equipment is put back into operation.
• Daily: Make sure the Safety Locks are in good operating condition. Do not use your QuickJack if
the Safety Locks are damaged or excessively worn.
• Daily: Inspect Lift Blocks for damage or excessive wear. Replace as required with genuine
QuickJack parts.
• Weekly: Check all bolts and pins to ensure proper mounting.
• Monthly: Lubricate all hinge points and check for excessive wear.
• Monthly: Check Air Cylinders to make sure they have the correct amount of pressure.
• Every other month: Check Hydraulic Fluid levels and refill if required.
• Replace all caution, warning, and safety-related labels on the QuickJack if illegible or missing.
• Reorder labels and worn or damaged parts from quickjack.com.
Lubrication Points
QuickJack recommends using white lithium grease (or equivalent) and a grease gun with an
appropriate tip (a Lube-Link™, for example) for lubrication.
Lubrication points are shown below.