Network Device, DL3800E User's Guide
4-26 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001
4
Figure 4-13 Network Configuration Screen
Table 4-7 NETWORK CONFIGURATION MENU Options
Parameter Description/Action
Alarm This item allows you to enable (Report) or disable (Mask) the DL3800E unit
from reporting alarms or sending SNMP traps from any of the individual E1
network ports.
To change the present Alarm mode, use the UP and DOWN ARROW keys
to highlight the Alarm item in the appropriate line for the desired port, and
use the Space Bar to toggle between Report and Mask. Highlight Confirm,
and press the Enter key to confirm any change. (Default - Mask)
Active/Restore Mode Selects the Active/Restore Mode for each of the E1 network ports.
To change the present mode, use the UP and DOWN ARROW keys to
highlight the Active/Restore Mode option for the desired port, and use the
Space Bar to toggle between the following selections until the desired choice
appears: use w/auto restore (failed line is restored automatically when
problem is solved); use w/manual restore (user must manually restore line);
Never Use (never mux data onto this line); Install/Test only (always mux
data onto this line, even when it’s bad). (Default - Never Use)
CRC4 Allows CRC4 coding to be enabled or disabled
Major 01/01/90 04:58:17 Unit: 0 NET : 2 (114)
Network 15 Minute UAS Major Threshold Exceeded
Major 01/01/90 04:58:17 Unit: 0 NET : 1 (114)
Network 15 Minute UAS Major Threshold Exceeded
DIGITAL LINK DL3800E SR 2.00.00 NODE 7: 01/01/90 05:55:07 MJ
SELECTED DEVICE ADDRESS: 7.00.000 NAME:
NETWORK CONFIGURATION Exit Confirm
PORT ALARM ACTIVE/RESTORE CRC4 TSLOT16 N1 N2 N3 N4 N5
1 REPORT Use w/auto restoreENABLE DATA 11111
2 REPORT Use w/auto restoreENABLE DATA 11111
3MASKNever Use ENABLEDATA 11111
4MASKNever Use ENABLEDATA 11111
5MASKNever Use ENABLEDATA 11111
6MASKNever UseENABLEDATA 11111
7 REPORT Use w/auto restoreENABLE DATA 11111
8MASKNever Use ENABLEDATA 11111
Primary Clock Source: Xmt: Int Rcv: Net 1
Secondary Clock Source: Xmt: Net Rcv: Net 2
DSU MODE: Inverse Mux (Standard operation) Suppress Yellow Det.: Disabled
Second Error restoral interval: Immediate
Hardware Revision: Port 3&4: -- Port 5&6: -- Port 7&8: --