Network Device, DL3800E User's Guide

4-4 DL3800E Inverse Multiplexer User’s Guide — July 9, 2001

INVERSE MULTIPLEXER MAIN MENU COMMANDS

When a DL3800E unit is first powered up, the Main Menu (Figure 4-1 on

page 4-3) appears on the terminal screen. This describes those functions

that can be performed, parameters viewed, changed and/or deleted from

this menu. The INVERSE MULTIPLEXER MAIN MENU items are shown

in Table 4-1 (these items are described in more detail in the following

sections)..

SELECT LOCAL/REMOTE

When in the INVERSE MULTIPLEXER MAIN MENU, this option allows

you to view and access the other items on either the local or remote

DL3800E. The Device Address and Name in the header portion of the

display screen will identify the unit that the terminal is presently

communicating with.

To move to the Main Menu of the other DL3800E, highlight SELECT

LOCAL/REMOTE and press Enter. The Device Address and Name in the

header should change to the new unit as shown in Figure 4-1 on page 4-3.

Table 4-1 Main Menu

Menu Description

Select Local/Remote Allows you to move between the Main Menu of the Local and Remote

units.

Alarms and Status Provides current alarm and status report of the common equipment, DTE,

and E1 lines.

Statistics Allows you to access the STATISTICS MENUS of the various E1 lines.

Event History Allows user to view and clear alarms and event history of the DL3800E.

Configuration Allows you access submenus to configure certain parameters of the

DL3800E, network, and DTE.

System Utilities Allows you to perform various system utility functions such as download

software, configure SNMP, configure login, and delete or save

configuration.

Tests Allows you to initiate diagnostic loopbacks.

Manual Network Restoration Allows you to manually restore a E1 circuit instead of it being restored

automatically upon the clearing of a problem.

Logout Allows you to log out of the DL3800E unit without having to wait for

automatic logout.