Full Product Manual

12 11
Water Force Manual | www.quickdams.com Water Force Manual | www.quickdams.com
FOLDING UP THE WATER FORCE FOR STORAGE
It is very important to fold each Water Force with aps laying at to ensure a long shelf life.
Folding the Water Force (model WL-1430 illustrated)
1 - After cleaning and drying the
Water Force, stretch it out on a
large at surface.
3 - Before folding the Water
Force, keep all the joints open
to make it easier to tie a second
Water Force to it, if need be.
2 - Make sure all inner aps are
facing the same direction & at.
A stick or pole may be used to
help atten.
4 - Start folding from the back
so that the ballast weights will
be positioned in the middle and
under the Water Force. Use the
folds already appearing on the
fabric as a reference.
5 - Depending on the model -
the unit may need to be ipped
over. If the instruction label is
visible, ip the unit & roll from
the opposite side of the label.
If the label is not visible- lift up
1 end to nd the label & then roll
from the opposite end.
6 - Once rolled, the velcro straps
will wrap around the unit & the
label will be visible.
Please note that the folding pattern and number of folds differ for each size of barrier
WL-06 and WL-14 Model
1 fold only
WL-20 and WL-26 Model
2 folds
WL-39 Model
3 folds
Place objects to raise Water Force to dry
out, prior to storage
MAINTENANCE
It is strongly recommended to wash and dry the
Water Force after each use, before storing it. This
allows you to check for any damages that may have
occurred during use. Cleaning the product with a
pressure washer or strong water hose is strongly
recommended.
Caution: Storing away a Water Force unit that has
not been cleaned & left with debris, leaves & mois-
ture will cause damage to the fabric & reduce its
useful life, as well as leave an unpleasant odor.
STORAGE & DEPLOYMENT
Every Water Force should be kept in its storage
bag or crate for protection against UV rays, dirt,
and damages, as well as easier handling during
transport.
The Water Force can be piled one on top of the
other, upright or at, without this hampering their
deployment. However, storing the Water Force in a
vertical position is highly recommended to maintain
its shape when rolled up. We don’t recommend
setting the Water Force directly on a damp surface.
It is best to lay on a wooden pallet or any dry
surface to eliminate mold.
Materials resist temperature of -40°F to 120°F (-40°C
to 50°C) . Even when stored for several years at these
temperatures (maximum 10 years), the Water Force
remains effective.
Rodents are not attracted to polymer canvas and
will not chew this type of material.
REPAIRS
In the event that your Water Force has a tear or
perforation, using contact cement & a repair patch
from the inside may be all that is needed.
If that does not appear to be the solution, then we
suggest contacting local sewing professionals to
assist in a repair. They should have equipment suitable
to manage canopies, canvas truck covers, tents, car
shelters, shoe repair or something similar. If that is
not an option, shipping the unit back to the
manufacturer for repairs may be an option, but
freight can be costly. Any damage (cracks/holes)
resulting from sharp objects can be repaired, but
these are not covered under the warranty.
WARRANTY
Each Water Force is manufactured and inspected
according to strict quality standards. A registration
number is printed on the ends of each Water Force,
which is warranted against all manufacturing defects
for a period of 2 years. Fabric materials are UV coated
& have a 20 year shelf life with normal occasional use.
STORAGE DEPLOYMENT CRATES
Storage & Deployment crates are critical for
areas that need multiple units & a quick way
to deploy them. Each crate is custom designed
for each customer application.
We offer wood or steel, fork lift or wheeled &
can accommodate custom requests.