Use and Care Guide

1. Take into any considerations any obstructions
of Water-Gate (pools, trees, sheds, etc.)
2. You will need a clear a path of at least 2ft
(61cm) around the perimeter of the structure
that is being protected.
3. A clear path will be required to place the
Water-Gate into proper position. Use chart
(next page) to determine the amount of space
needed, depending on the height selected.
4. Use red line for measuring to determine
overall length needed.
5. Multiple pumps are required to pump rain
& seepage water away from the back end
of the Water-Gate.
6. Corners can be created by folding unit
properly. Curving Water Gates around bends
will maximize length of unit.
7. Different heights can be joined based on
height of ood concerns.
8. Direction of water concern
Key
2ft Clear path around
Perimeter
Skirt length based on
height selected
Measuring Line to
determine Length Needed
How to select the correct size
& length of Water-Gate
How to select the correct size
& length of Water-Gate