How to Guide

1. Width of opening (wall to wall within the reveal)

2. Reveal (measured from the outer side of the door frame, or furthest obstruction outwards, to the corner of the

face wall of the building)

3. Construction of reveal (make sure that it is a smooth surface- this will create the most effective seal- if it is not smooth between

Flood Gate & reveal use optional side rails.

4. Which way does the door/window open (inwards, outwards, sash, sliding, up and over, roller shutter, none opening etc.)

Gate sizes

Note:

For openings wider than 50”, stanchions

must be used. See Flood Gate Stanchion

Installation & Maintenance section

of this manual on page 8.

Fits openings 30” – 35”

Fits openings 35” – 40”

Fits openings 40” – 45”

Fits openings 45” – 50”

QDFG30

QDFG35

QDFD40

QDFG45

Box components:

Doorway anatomy:

17mm Ratchet Wrench

Flood Gate

Neoprene Sleeve

Instructions & Operations Manual

DOOR

Example:

Inside of building

Reveal

Door-frame

Width of Opening

Outer wall