Instructions / Assembly

THE NEXT GENERATION IN FLOOD PROTECTION
TM
Activates
when wet!
888-761-4405
QUICKDAMS.COM
INSTRUCTIONS: EACH FLOOD BAG:
Place Quick Dams in the path of problem water
Quick Dams are activated when exposed to fresh
water and will absorb & swell to create a barrier
During rst activation, you will see white gelled
particles in the stitching areas- this is normal &
naturally decomposes
If a rush of water is expected, pre-soaking the
Quick Dams and stacking them is recommended
Quick Dams may be left in position for long term
ood protection, up to several months
Quick Dams are reusable - they grow when
exposed to water and will shrink as water evaporates
Quick Dams may not be a solution for all situations
Adjust quantity used and stacking method to suit
your specic situation
* Not for use with salt water ooding
USAGE OPTIONS:
For ongoing protection: leave in place for
6-8 months.
Continues to reactivate when re-exposed
to water.
To store away and reuse later: allow time for
evaporation, typically 2-3 months of continued
dryness. Drying times vary depending on
environment conditions.
DISPOSAL OPTIONS:
Dispose in the trash when no longer needed.
Cut open and expose contents directly to
sunlight, which will decompose within a few days.
Expose bags to salt or salt water, which will
release the water and deate the bags.
Quick Dams are safe, non-toxic
& environmentally friendly.
Starts as: 15” x 26” .63lbs. each
Grows to: 12” x 24” x 3.5” 32lbs. each (4gallons)
PROPER FLOOD BAG STACKING:
Pyramid: Overlapped
and Stairstepped
For proper stability,
width should be 3 times height
Patent Pending
NOTE: Quick Dam Flood Bags may not be the ideal solution
for all ood control situations.
FLOOD
BAGS
For secure stability- Be sure that Flood Bags are
stacked higher than expected water level.

Summary of content (1 pages)