Specification Sheet

FlexPro
Expandable Barricades
Components
Posts Bases Slatwall Panel
Collars
(supplied)
Allen Key
Lug
Lug
Lug
Lug Slot
Lug
2
x
2
x
1
x
4
x
1
x
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
Screw each post onto a base.
Make sure the post is screwed
down as tightly as possible.
Attach a collar to the bottom of each post
so that they are touching the base with the
lug slots facing upwards. The lug slots on
the collars of each post should be facing
each other. Tighten the collars with the allen
key.
With the posts positioned a panel width
apart, lift the panel and fit the lower panel
lugs into the collar lug slots.
Pivot the panel into place.
Attach a collar to the top of each post, lug
slots facing downward and fit the upper
panel lugs into the collar lug slots. Tighten
the collars with the allen key.
877.977.7657
[e-mail]
www.QueueSolutions.com
FlexPro is a tough, steel expanding barricade designed to protect workers and customers in hazardous areas or
where maintenance work is being conducted. These models can be linked to make long run barriers and collapse into
a compact unit for easy storage and transport.
With a collapsed width of just 13” and weighing only 19lb the
FP110 model is highly portable and can be joined to other units
to make a barrier of any length. A sturdy steel frame with
aluminum cross members, locking casters as standard and two
OSHA color options, make the FP110 the best specified
expandable barricade available.
FlexPro 110
This model has the same
features as the FP110 but
expands to a full 16’ and is
designed for creating long run
barriers.
Easy Storage Interlocking Design Locking Wheels Wall Mounting
Brackets Available
FlexPro 160
29lbSteel/Aluminum 37” / 16’FPA160
Model Construction Height / Length Weight Color Options
Red / White
Yellow / Black
FPA110
FPS110
Steel/Aluminum
Steel
37” / 11.5’
37” / 11.5’
19lb
26lb
Model Construction Height / Length Weight Color Options