User manual

16
10 APPENDIX
10.1 Accessori es
Omnimount ™ plus fixings
Quested S series stands (with unique coupling system)
10.2 Spares
Description Part Number
LS2529G 10" Bass Driver Q01-0038
Fuses T3.15A L01-0010
Fuses T6.3A L01-0018
10.3 Driver replacem ent procedure
if it is necessary to replace the bass driver, place the cabinet on its rear and, using a 4 mm
hex head driver, remove all of the bolts. As with most objects held by a series of bolts, these
bolts should initially be loosened a little, one at a time rather than each bolt being fully
removed whilst the other bolts remain fully tightened. When replacing the bass driver, the
gasket behind the driver should be replaced with the new gasket that will be supplied with
your new driver.