Owner's Manual

M120
Features
The M120 mixer amplifiers are complete all-in-one mixer amplifier solutions for commercial and industrial
applications. These low-cost units offer all the necessary features in a simple format.
• Three (3) microphone inputs and two (2) line inputs (terminal block, RCA and 3.5mm on the front panel).
• Rated power output: 120 Watts.
• A 2-band tone control helps correct the overall sonic response of the PA system.
• Acceptable wide-range input level (up to 44 dB)
• Terminal block telephone paging input with volume and attenuation level controls.
• Two (2) layer priority muting.
• Music on hold (M.O.H.) output used to connect the mixer to the telephone system to play music or pre-recorded
messages. This output can also be used to supply a line level signal to a power amplifier.
• Microphone inputs 1 with phantom power for connecting condenser microphones.
• Low distortion and low noise level.
• To ensure long-term reliability, M-Series mixers are equipped with a sophisticated protection circuit with
current limiting to avoid problems associated with overloading and overheating.
• Compact size makes it easy to install on a work desk or in a standard 48.3 cm (19 in) rack using optional
brackets.
• An ideal solution for commercial and industrial applications.
• An extended three-year warranty.
3