User manual

QTA 6000 Series
User Manual
User Manual
Q-Tech Commercial Series
QTA 6060M/6120M/6250M
13
The diagram below shows a typical small House
of Worship audio system. This system utilizes four
microphones, one for the Pulpit and three on the
choir. A Master volume control (Quest VC - 10K) is
connected to the “VCA” terminals for overall level
control. For background music, a CD player’s audio
outputs are connected to Input 6, and a recording
device (cassette recorder or computer’s audio input) is
connected to the Tape Out jacks. For system tuning, a
1/3rd octave graphic EQ is connected to the Pre Out/
Pwr In jacks. For the “cry room” an 8 Ohm speaker is
connected to the Zone 2 “1W 8” output.
 Dipswitch Settings
 Dipswitch “A” 1-6 All Off
 Dipswitch “B” 1-8
 Switch 1 - 300mV
 Switch 2 - “Not Used”
 Switch 3 - “Mic”
 Switch 4 - “Mic”
 Switch 5 - “Mic”
 Switch 6 - “Mic”
 Switch 7 - Will depend on type of
microphones used
 Switch 8 - Master
Example 3
Example 3 - Small House of Worship