User manual

QT ZM66M
User Manual
User Manual Q-Tech Commercial Series
QT ZM66M
4
General Description
The QT ZM66M 6 zone paging console is able to page individual zones in addition to making “all
call” paging announcements.
Operation
Individual Zone selection, or all call. 1.
Keep button depressed while speaking. A chime tone will be activated on pressing zone button and LED will 
light up.
Announcement2.
After selecting the zone to be paged, keep the button depressed while making the announcement. If other QT 
ZM66M consoles are being used, this is prioritized as a first in/first served basis.
Message 3 Activation. 3.
Message 3 has many useful functions. This message may be repeated, or a single message played 
continuously. Use of message 3 is made via the alarm button on the front panel of The QT ZM66.
Paging Console has priority over all other sources4.
Recorded messages 5.
Three different messages, 60 seconds max each could be recorded. The first and second message are 
activate by contact play message on QT ZM66 and they go to all zones. The third message could be only
activated by microphone base console and it goes only to the pre-selected zone. Messages have priority on
all music sources.
Maximum of 6 consoles which may be used. 6.