User manual
30
c
o
Safety Precautions
Flying and installation of this
speaker cabinet must be carried
out by suitably qualied person-
nel following the approved
safety standards.
Do not attempt to clean the
plastic enclosure with solvents
or petrochemical based cleaners.
The power voltages of the
ampliers inside these speakers
are high and could cause serious
injury or death if touched while
the power is connected. Do not
open the case as there are no
user serviceable parts inside.
Do not expose the speaker
cabinet to direct precipitation
or stand in water. Liquid getting
into the box will risk a short
circuit and will be hazardous.
Do not stack the speaker
cabinet in a manner that could
cause injury should a cabinet
become dislodged.
Do not place sources of heat
on the speaker cabinet such as
lighting equipment or smoke
machines.
Attention
Before connecting or operating your new
Quest Engineering speaker, please study
the accompanying instruction manual
paying particular attention to the operating
precautions and wiring procedure.
Quest Engineering will not assume responsi-
bility for incorrect installation or operation of
this product.
Very important
Before using your speaker check to make
sure that the selection of the power supply
voltage (115/230 Volts) is set correctly for
your country. An incorrect setting can lead
to severe damage to your new powered
speaker on activation. If you are not certain
that it is set correctly, check with your Quest
Engineering dealer.
1
SAFETY
QSA 300
Active Speakers
User Manual
QSA 300
User Manual