User manual

QM 1000P
User Manual
User Manual Q Motion Series
QM 1000P
2
WARNING
When the Unit is in Use
• Should the following irregularity be found
during use, immediately switch o the
power, disconnect the power supply plug
from the AC outlet and contact your nearest
Quest dealer. Make no further attempt to
operate the unit in this condition as this
may cause re or electric shock.
• If you detect smoke or a strange smell
coming from the unit.
• If water or any metallic object gets into
the unit
• If protect lights are illuminated or the clip
lights stay on for more than one second
• If the power supply cord is damaged
(exposure of the core, disconnection, etc.)
• To prevent a re or electric shock, never
open the unit case as there are high voltage
components inside the unit. Refer all
servicing to your nearest Quest dealer.
• Do not place cups, bowls, or other
containers of liquid or metallic objects on
top of the unit. If they accidentally spill into
the unit, this may cause a re or electric
shock.
• Do not insert nor drop metallic objects or
ammable materials in the ventilation slots
of the unit’s cover, as this may result in re
or electric shock.
When Installing the Unit
• Do not expose the unit to rain or an
environment where it may be splashed by
water or other liquids, as doing so may
result in re or electric shock.
• Use the unit only with the voltage
specied on the unit. Using a voltage
higher than that which is specied may
result in re or electric shock.
• Do not cut, kink, otherwise damage nor modify
the power supply cord. In addition, avoid using
the power cord in close proximity to heaters,
and never place heavy objects -- including the
unit itself -- on the power cord, as doing so may
result in re or electric shock.
• Be sure to replace the unit’s terminal cover
after connection completion. Because
high voltage is applied to the speaker
terminals, never touch these terminals to
avoid electric shock.
• Install in a well ventilated equipment rack
away from heat sources.