User manual

Q-Matrix 88
User Manual
User Manual
Q-Tech Commercial Series Q-Matrix 88
20
Wall Panels
QT1WML In-wall Mixer
The QT1WML is a remote control panel
designed to work together with the Q Matrix
88. This in turn may be used as a remote
source selector, volume control and local
input panel. The QT1WML remote control
panel has been designed with LED display to
provide direct display of the selected sources.
The up and down buttons are used to change
the source material to be routed to the zone
where the QT1WML is to be used.
A ten step volume control is provided over all
sources. A dual RCA input and a microphone
XLR input are included, each with their own
input level control. The communication
between the panel and the Matrix is through
industry standard CAT5 cable which is also
used to supply power from the Matrix to this
panel within 50 meters.
Only one QT1WML panel can be used within
each Audio Zone.
Front Panel
1
Source Level
Ten level volume control over selected
source output. Clockwise adjustment
increases the volume
2
MIC Level
Ten level volume control over local
microphone input. Clockwise adjustment
increases the volume
3
Music Level
Ten level volume control over local line
input. Clockwise adjustment increases
volume
4
MIC Input
Local microphone input by XLR type
connector
5
Power LED
The LED will turn blue when powered on
and will be extinguished when powered
off
6
Source Channel LED
The white LED with blue background will
display the source channel 1-8 with the
local line level as ‘L’
7
Source Up & Source Down
These two buttons are used to increase or
decrease the input source channel from
1-8 and local input (L)
8
Line Input
Local line input by dual RCA type
connector. This will be summed as mono
output
86mm
146mm
3
2
1
4
5
6
7
8