User manual

HPi110 & HPi210
Quick Rig (QR) Systems
User Manual
HPi110 & HPi210 Quick Rig (QR) Systems
8
Setting The Angle Of The Cabinet
Once the speaker has been mounted correctly, the angle at which the speaker will be fixed can be
adjusted by fitting the Q-Pin into the correct hole. Four angles are available:
HPi110 with Kit QR1 Standard
HPi110 with Kit QR1 Long Side Plates
7.5 degrees 15 degrees 30 degrees0 degrees
The standard kit offers the possibility to hang
a speaker at 0˚ and 7.5˚.
If extra tilt (15˚ or 30˚) is needed, optional
extension plates can be purchased separately
and inserted in the wall-mount assembly.
Order Reference:
ACHPiEX2
Option Note for QR-1
(Available as a separate component)
• Take the medium side plates off the
assembly by removing the bolts.
• Use the same bolts, washers and
nuts for the long plates (all bolts,
washers and nuts should be re-used)
• Long side plates can be ordered
for adding ‘x’ of additional distance
from the wall. (sold separately)