Installation manual

Installation Guide

4.4.2 Mini Pendant Mount

Items Needed:

• Dome Camera

• Mini Pendant Mount and other equipped items (optional accessory)

• Waterproof Rubber (standard accessory for the outdoor dome)

• Screws and Screw Anchors for fixing the Mini Pendant Mount (not

supplied)

Tools Needed:

• Tool for drilling

• Tool for screwing

Follow the steps to mount the dome with the Mini Pendant Mount.

1) Make a cable entry hole on the wall to recess the cables. Otherwise, users

could push up the cable entry board on the Mini Pendant Mount’s

mounting plate to place the cables, as shown in the photo below.

2) To avoid insects entering the pendant mount, you could block the cable

entry hole with the supplied sponge in two ways. See the illustrations

below.

3) Thread the cables through the Mini Pendant Mount and fix the pendant

mount on the wall with proper screws and screw anchors (not supplied).

4) If use an outdoor dome, attach the waterproof rubber to the Mini Pendant

Mount.

5) Thread the cables through the top holder and fix it to the Mini Pendant

Cable Entry Board

Mounting Plate

Sponge