Installation manual

ManualsBrandsQueensland security ManualsSecurity CamerasOSD High Speed Dome Camera

Installation Guide

34

STEP 4

Rotate the T-Bar’s wings to fix

the T-Bar at the edge of the

ceiling opening.

STEP 5

Tighten the screws on the

wings.

STEP 6

Connect the data cable to the

dome body through the center

hole of the bracket.

NOTE: If use an IP

dome, a network cable

is needed other than the data

cable.

STEP 7

Mount the dome body onto the

bracket and rotate it clockwise.

Then ensure the dome body

fastened firmly and screw the

T-Bar Body Holder.