Installation Instructions

ManualsBrandsQuectel ManualsElectronicsGPS Tracker



Vehicle/Battery P

owered,

Rechargeable Trailer and

Asset Tracker

HIGHLIGHT

The EDGE-M2/ EDGE-M3 tracker is a real-time vehicle

tracking system designed for vehicle recovery, fleet

management, and more..

IT’SRELIABLE



The ultra-thin yet durable EDGE-M2/ EDGE-M3is a high-

performance cellular tracking device designed for vehicle

financing, vehicle tracking, lot management, theft recovery,

or other fleet applications. With an integrated GNSS

receiver, the Wildcat includes an LTE Cat-M modem for

wireless data communication. The built in high

performance antennas for both cellular radio and GNSS

receivers make installation easy.



IT’SSIMPLE



No programming skills required; the EDGE-M2/ EDGE-M3

comes with easy-to- configure application software and an

extended AT command set. Reports can be triggered

periodically or in response to events such as motion,

speeding, harsh acceleration and braking, geo-fence

violations, and battery status. Notifications can be sent for

vehicle towing, battery removal, and more.

IT’S FUNCTIONAL

The EDGE-M2/ EDGE-M3 interface supports serial

communication with external terminals and devices, as

well as IO options dedicated to ignition, starter inhibit, and

buzzer.

A built in 3-axis accelerometer enables motion detection

and monitoring of driver behavior. An internal Lithium-Ion

back up battery allows for continuous operation more than

2 days @ 1 report per day when the device is disconnected

from the main power. An optional buzzer alert system for

driver warnings is available inside the unit.

EDGE‐M2/EDGE‐M3

Summary of content (5 pages)

PAGE 1
Vehicle/Battery Powered, Rechargeable Trailer and Asset Tracker EDGE‐M2/ EDGE‐M3 The EDGE-M2/ EDGE-M3 tracker is a real-time vehicle tracking system designed for vehicle recovery, fleet management, and more.. .IT’S RELIABLE The ultra-thin yet durable EDGE-M2/ EDGE-M3is a highperformance cellular tracking device designed for vehicle financing, vehicle tracking, lot management, theft recovery, or other fleet applications.
PAGE 2
 LTE-CAT M1  Integrated cellular and GPS antenna LED status indicators for GPS and network registration  Integrated accelerometer       I/O options to support ignition, buzzer, and relay.
PAGE 3
ELECTRICAL Specifications CELLULAR CAT M1 LTE: 699/787/1710/1850/2155 B2@20±1dBm/ B4@20±1dBm / B12@18± 1dBm /B13@18±1dBm /B25@20±1dBm  Integrated high sensitivity antenna  Auto register to packet network  GPS  Channels: 55  Tracking Sensitivity: -161 dBm  Acquisition Sensitivity: -146 dBm  Location Accuracy: <2.
PAGE 4
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 5
FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF Exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter.