Product Info
Table Of Contents
- 1 Introduction
- 2Hardware Design
- 2.1Basic Hardware
- GPS
- GPIO
- LED’s
- UART
- Relay Driver
- Power and Battery
- Timers
- Watchdog
- Accelerometer
- 2.2 Basic RF Performance
- 2.3Certification and Safety
- 3Software Features
- 3.1Basic Software
- 3.2 Remote Update
- 3.3 Power Modes
- 3.4 AT Commands
- 3.5 Ack’ed Mode
- 3.6 Event Report Format
- 3.7 Reset
- 3.7.1 Context Preservation
- 3.8 Startup Banner
- 4Test Method
- 4.1Hardware
- 4.2Software Test
- Mechanical Structure (mm)
- FCC Statement
- RF Exposure Warning Statements:
- IC STATEMENT
14
4 Test Method
4.1 Hardware
Test Item
Description
Baseband Function Test
• Power Input Test
• Power Consumption and Current Test
• Heat Dissipation Test
• UART Stability Test
• GPIO Level Test
• LED Stability Test
• Drop Down Test
• ESD Test
• High/Low Temperature Test
• Humidity Test
RF Test
• RF Performance Test
• GPS Performance Test
• Antenna Performance Test
4.2 Software Test
Test Environment Construct
Message Test environment
1. USB dongle and PC as message server
2. Send message to WCM
UDP Test environment
1. Connect dongle to PC and create dialup as ip server
2. WCMcreate IP connection to server
UART Test environment
1. Connect WCMto PC with com serial cable
2. Open Terminal tool and send at command
3. Response can be shown at terminal window