User's Guide
Operation the device
- Single tap button^ to Power-ON
- Hold button for 5s & release to Power-OFF
- Hold button for 10s to clear battery counters
^(Power button accessible when enclosure is open)
LED Indications
- Green LED when Power-ON
- Red LED when Power-OFF
- Flashing Red LED for device failure
- Flashing Blue LED when firmware upgrade
Battery
- AA Batteries: 12, pack of 4 cells
- Type: Energizer E91 AA
- 5 yrs battery life, on CatM/NB Network
- 2 yrs battery life, on 2G Network
Tracking
- GNSS: fully capable GNSS tracking module
- Network triangulation based on Cell ID
Triangulation based on CAT-M/NB-IoT cell info
Triangulation using 2G when NB-IoT not available
- Wi-Fi MAC IDs capture for location triangulation
- BLE beacon sniffing
Physical Aspects
- Weight: 350g
- Enclosure Material: ABS + PC
- Ruggedization: IP66 per IEC standard 60529
- Mount Screws: 4 x M6 - 30mm
Certifications
- FCC: 2AUKT-ULTRALONG
- IC: 23859-ULTRALONG
Communication
- CAT-M/NB-IoT with 2G fallback
- Wi-Fi
- BLE
Sensors
- Temperature (Resolution: 0.1°C, Accuracy: ±1.5°C,
Range: -40 to +125°C)
- Accelerometer 3-axis, ±16G
- Magnetometer 3-axis, ±50 Gauss
Configuration Update
Key parameters can be configured through BRIX
- Publish Interval: 5 minutes to 24 hours
- Log Interval: 1 minute to 24 hours
Dormant Mode to publish every 72 hours and no logs.
Data transmission and storage
- Streams sensor data to BRIX cloud real-time^
- Offline logging of sensor data on built-in memory for
up to 6 months when no network connectivity
Operating Temperature
-18°C to 60°C
Built-in Antenna
- Cellular: SMD antenna with -2dBm gain
- BLE and Wi-Fi: CHIP antenna with 3.5dBi gain
Capabilities and Durability
- Device aware of its state when in
CHEP SC | Non-CHEP Dwell | Transit
- Periodic capture of sensor data based on log
frequency
- Secure log file transmission over Wi-Fi and Cellular
- Efficient power management with smart logic for
location determination
- Over the air firmware upgrade: Wi-Fi
- Publish based on event triggers
Accelerometer: Impact and movement trigger
Temperature: out of bound condition
Security
- Encrypted communication between device & cloud
- X.509 Public/Private key for device authentication
- SSL/TSL v1.1 based security over network