TU600B TU600B Technical Manual Version 1.
TU600B Content Content .......................................................................................................... 2 Introduction .................................................................................................... 9 Related Information .......................................................................................................... 9 Safety first......................................................................................................
TU600B Return Merchandise Authorization – RMA ..................................................................... 24 Specifications .............................................................................................. 24 Product specifications .................................................................................................... 24 Connections: ...............................................................................................................
TU600B Belize ............................................................................................................................. 34 Bermuda......................................................................................................................... 34 Dominica ........................................................................................................................ 35 Paraguay ..............................................................................................
TU600B Corporate Office Trackunit APS Gasvaerksvej 24, 4 sal 9000 Aalborg Denmark. www.trackunit.com Copyright and Trademarks © 1998-2020, Trackunit APS. All rights reserved. Trackunit, Trackunit logo and Trackunit are trademarks of Trackunit APS, registered in the United States and in other countries. All other trademarks are the property of their respective owners. Release Notice This document is release v1.0 of the TU600B, Technical Manual.
TU600B RESELLER’S AND ITS CUSTOMERS’ SOLE RISK, AND TRACKUNIT SHALL HAVE NO LIABILITY WHATSOEVER IN CONNECTION THEREWITH. RESELLER SHALL INDEMNIFY AND HOLD TRACKUNIT AND ITS SUPPLIERS HARMLESS FROM ANY CLAIM BROUGHT AGAINST TRACKUNIT WHICH ARISES FROM RESELLER’S USE OR DISTRIBUTION OF THE PRODUCT IN CONNECTION WITH SUCH ENVIVRONMENTS OR APPLICATIONS.
TU600B Bluetooth SIG registered: Declaration ID: D050742 Company identifier UUID: 2159 (0x086F) US - CTIA certificates: PTCRB ID: Automotive: KBA UN ECE R10 rev 5/1 certified : LATAM America El Salvador: CNAF Certificate number: Insurance and Pension (Tracking system): Denmark-FOP Control certificate: Europe: EU certificate: CE mark by EU-Tec certificate: United Kingdom (UK): UKCA mark by DOC Trinidad and Tobago: TATT approval number: ZMF-TU600B (Recognized by FCC approval ID) British Virgin Islands
TU600B TA approval number: ZMF-TU600B (Recognize by FCC approval ID) South Africa: ICASA certificate number: Aruba: DTZ Reference number: (Recognize FCC approval ID) Djibouti: DDTIC certificate number: Panama: ASEP Certificate number: Middle East: Bolivia: ATT Certificate number: (Recognize FCC approval ID) Turkey: (Listed but import license acquired.
TU600B Introduction This document contains the installation guide for the (GSM / LTE cat-M1 / NB2-IOT / GNSS / BLE) product type series TU600B units. This manual is intended for use by system integrators, service providers and application developers (collectively, “Resellers”). It is not intended for end-users of the TU600B. Any end-user documentation is to be prepared and furnished by the resellers. This manual covers the TU600B with 60.
TU600B Interference Like all wireless devices, the TU600B may encounter electrical interference that may affect its performance. Avoid Body Contact with Device during Operation Do not operate the TU600B in direct contact with your body. Maintain at least 8 inches (20 cm) separation between the device and any parts of your body. Qualified Service Except for batteries and Subscriber Identification Module (SIM) card, the TU600B contains no user serviceable or replaceable parts.
TU600B The TU600B unit cannot be turned off after installation; however, the unit is mostly asleep waiting for either the wake-up timer or activity on the acceleration sensor. The unit operation can continue for approximately 3 to 4 days depending on the charging state of the backup battery. The TU600B unit is designed for vehicular use only. Electronic Devices Most modern electronic equipment is shielded from RF signals.
TU600B Posted Facilities The TU600B unit cannot be turned off after installation, so any vehicle, moving machinery, construction machinery installed with the TU600B etc. must not enter any facility where posted notices prohibit the use of wireless phones or two-way radios. Aircrafts FCC and FAA regulations prohibit using wireless phones while in the air. Do not carry the TU600B unit aboard an aircraft as it cannot be turned off.
TU600B Battery Safety Information Adhere to the following guidelines to avoid the risk of fire or explosion: 1. Dispose of the used battery according to the instructions provided with the battery. 2. Do not drop, puncture, disassemble, mutilate, or incinerate the battery. 3. Touching both terminals of a battery with a metal object will short circuit the battery. Do not carry batteries loosely if the contacts may touch coins, keys, and other metal objects (such as in pockets or bags). 4.
TU600B Delivered standard content The delivered standard package content includes the following items: 1 x (GSM / LTE cat-M1 / cat BN2 / GPS/GLONASS)-unit of the model type TU600B 1 x Mounting cradle. 1 x Li-ion Battery PN 4233.0002 or PN4233.0002 (May already be mounted inside the TU600B unit) Optional content for generic installation: 1 x Fuse with fuse holder for installation up to 24V DC/ (Max 1A) for TU600B units delivered with open cable ends.
TU600B Installing the unit Use location – Children not likely to be present This equipment design typically applies to commercial or industrial equipment expected to be installed in locations where only adults are normally present. Practical installation advice It is very important to be careful when installing the unit, as incorrect installation will reduce the quality of the GPS position reports (Ex.
TU600B Connections The connections depend on the type of vehicles / machines etc. in which the (GSM/LTE M1/NB IOT)/GPS unit is to be installed. Different variants of the TU600B device will have only a subset of the connections shown in the table below. Please contact your nearest sales office, distributor or “Reseller” for further information about the availability of other variants in your area.
TU600B Controller supports Bit Rates up to 1 Mbit/s. Physical Interface specification as referred to by ISO/11898-2. 120R CAN termination optional: Mounted, Not Mounted or controlled by Firmware (CAN configuration). The CAN Interface is only operational when supply voltage (12V / 24V / 48V) is present. Interface cannot operate on internal battery alone. M8 Connector: 1-Wire input The M8 3 pole connector contains 3 signals: 1-wire bus, 5V and Ground.
TU600B Functionality check Trackunit TU600B, Technical Manual v1.
TU600B “Verify my Trackunit” In order to control if the installation of the TU600B unit has been done correctly, it is possible to use the “Verify my Trackunit” tool. Trackunit TU600B, Technical Manual v1.
TU600B Troubleshooting Various error situations are listed below along with some possible solutions. Error Error description code F1 The unit does not answer the SMS command send to it. Possible solutions Verify if the SMS messages are sent to the correct GSM/LTE M1/NB IOT phone number. Check LED status; See the “Functionality check” chapter in this manual. If the TU600B unit has been delivered with the SIM card mounted. Contact Trackunit support.
TU600B Installation of the digital output According to the E1 certificate of the TU600B unit, it is prohibited under any circumstances to use this output to control any equipment that may influence the safety of the construction machinery and earth moving machines/vehicle operation and driving. The output must only be used to control comfort equipment. The example shows a 12V relay function with a 12V DC supply voltage. It is also possible to use a 24V relay with a 24V DC supply voltage etc.
TU600B SMS commands for output control Function Send SMS Return SMS Description Activation of the output MT OUT1=ON MTC ACK (SERIAL No.) OUT1 ON With this command the output is activated permanently. The output can be deactivated again using the “OFF” command. Deactivation of the output MT OUT1=OFF MTC ACK (SERIAL No.) OUT1 OFF With this command the output is deactivated.
TU600B For mounting the Trackunit TU600B in harsh environment, not covered by the compliance statements or areas where pressure cleaning is required the Trackunit HW shield PN 7402.9551 is required for protective mounting. Please order at Trackunit Aps. Recommended fuse holders and fuses up to 48V supply voltages (Can be ordered at Trackunit APS): a. Supply voltage 12V/24V (Max 30A) i. ATO blade fuses (Max 32V/1A) used with Littelfuse FHAC0002SXJ fuse holder (Standard). ii.
TU600B When contacting technical support, please be prepared to provide the information listed below: Minimum Information Required for Technical Assistance If you or a user reports difficulty with a TU600B unit (i.e. no GPS fixes, not communicating, LED not working, etc.), it is helpful to retrieve directly from the unit all current configuration settings and the message log data etc., that is accessible by the technical support when they receive the following information about the unit. 2.
TU600B Charging time for an empty backup-battery 3 hours at 25 ºC Expected lifetime of the backup-battery 3 years Digital inputs 4 Digital outputs 1 1-Wire interface Optional CAN interface Optional Bluetooth 5 LE (wireless) Optional Internal temperature ranges: Charging or maintenance charging (With external DC supply voltage) 0ºC to +45ºC (If the temperature exceeds this range the charging is disabled, and the battery put into internal storage mode) In active running mode (Without externa
TU600B Pmax = 0.
TU600B Mechanical specifications Dimensions: Length: Width: Height: Cable length: 122.1 mm 45.65 mm (49 mm incl. mounting cradle) 18 mm (23 mm incl. mounting cradle) 170 – 180 cm Environmental class: IP67 (Standalone) IP66K, IP69K (Mounted with HW shield) Enclosure material: Non-flammable PP casing and ABS cable connector lid. Weight: 65 g (excluding the cable) Trackunit TU600B, Technical Manual v1.
TU600B Approvals and certificates The TU600B product is certified according to KBA (E1 mark), EU (CE mark), UK (UKCA mark) USA (FCC ID), Canada( IC ID), Japan JATE/MIC ID (GITEKI mark), Australia ACMA (RCM mark), New Zealand (R mark), Argentina (RAMATEL mark), Mexico safety (NOM mark), SUTEL (Costa Rica), NCA (Ghana), ICASA (South Africa), Chile (Resolution 403:2008), Ingress Properties (IP mark), Bluetooth SIG (BLE mark), CTIA (IoT Network mark), UAE (TRA), OMAN (TRA), Singapore (IMDA): “The Bluetooth® w
TU600B Statements according to CFR 47 Part 2.1091 and RSS-102: With respect to radiofrequency radiation exposure Information, it is declared that this equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclarations selon le CFR 47 Sections 2.
TU600B install guide) and requires that the output wire is connected to a relay to control the starter motor. 2. When the emergency stop on the machine is activated, the unit and keypad functions will be disabled. The internal battery ensures that a GPS position still can be acquired on an hourly basis.
TU600B (Expire 2021-06-30) EN/ISO 14982 2010 Agricultural and forestry machines EN 12895, DIN EN 12895 2015 (EN/IEC 62368-1 + AC/3 + A11) 2014, 2015, 2017 EN/IEC 62133 {Ed2} 2012 Industrial trucks – Electromagnetic compatibility Information and communication technology equipment safety Safety requirements for portable sealed secondary cells and for batteries made from them.
TU600B The TU600B product complies with the requirements of the relevant standards under Section 134 (1) (g) of the New Zealand Radiocommunications Act 1989, by the Supplier’s Declaration of Conformity (SDOC) Japan The TU600-25 model of the product family TU600B is approved in Japan with the certificate ID n°: [T] D200116003, [R] 003-200139, [R] 020-190254 (That contains a Bluetooth Low Energy interface) This device is granted pursuant to the Japanese Radio Law (電波法) =当該機器には電波法に基づく、技術基準適合証明等を受けた
TU600B “La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.” Brazil For the ANATEL homologation of the TU600-25 in Brazil the below information applies: Modelo: TU600-25 Para maiores informações, consulte o site da ANATEL www.anatel.gov.
TU600B Country Model Regulatory body Europe-CEPT TU600-25 EU-NB UK TU600-25 BSI UKCA mark Yes Russia, TU600-25 EAC EAC mark Yes TU600B PTD (NOTE: Accept EU DoC for Import if requested) No Macau TU600-25 CTT (NOTE: No certification required) No Japan TU600B TELEC/ JATE/ MIC [T] D200116003 [R] 003-200139 [R] 020-190254 Yes Australia TU600-25 ACMA RCM mark (By local signed SDOC) Yes New Zealand TU600-25 NZ Local importer must apply for approval Yes Singapore TU600-25 I
TU600B Country Model Regulatory body Certificate number Dominica TU600-25 NTRC No Paraguay TU600-25 CONATEL Yes Columbia BG95-M3 CRC (Approved for BG95-M3 TAC: 86773005) No TU600-25 CRC (Approval of TU600-25 TAC: 35361794) No Guyana TU600-25 TA Reference: Accept FCC-ID: ZMF-TU600B No Aruba TU600-25 DTZ Reference: Accept FCC-ID: ZMF-TU600B No Panama TU600-25 ASEP 4860 No Bolivia TU600-25 ATT Reference: Accept FCC-ID: ZMF-TU600B No Honduras TU600-25 CONATEL No Nica
TU600B Country Model Regulatory body Certificate number Label Kuwait TU600-25 CITRA No Oman TU600-25 TRA Yes Dealer Israel TU600-25 MOC (Import license number: for 2022/2023) No Turkey TU600-25 TTTE (Sinif 2) (NOTE: Import manufacturer declaration required) No Saudi Arabia TU600-25 CITC Jordan TU600-25 TRC Lebanon TU600-25 MOC No Bahrain TU600-25 TRA No Pakistan TU600-25 TAC No Turkmenistan TU600-25 TDS No Uzbekistan TU600-25 OSTZ No United Arab Emirates (UA
TU600B SAE J1455:2017, IEC 60529 + A1 + A2 (CSV) {Ed3.1} 2013 IP67 - Degrees of protection without HW shield IP69K & IP66K mounted inside HW shield. NOTE A: The TU600B is not to be mounted in areas with presence of Motor oil, Gasoline, Diesel fuel, Hydraulic fluid, Brake fluid, Transmission fluid , Glycol and water mixture etc. NOTE B: The housing not designed to withstand high pressure cleaning.
TU600B Environmental protection with use of HW shield: Trackunit Aps Gasvaerksvej 24, 4 sal DK-9000 Aalborg Denmark Phone +45 9673 7400 Trackunit TU600B, Technical Manual v1.
