User's Manual

pg. 5 Copyright © 2019 ThingsMatrix Inc., All Rights Reserved.
above the top cover. If the terminal cannot be installed face up due to the limitation of the installation
environment, the top cover can also be installed in the horizontal direction.
⚫ The installation position of the device shall be in the position without radio signal shielding. The
installation surface shall be kept clean and free of oil and dust, which will affect the installation firmness.
⚫ During the installation process, it is possible to trigger the optical sensor and activate the tamper alarm. If
the fixed device is installed first and then turn on the battery switch, the alarm can be avoided.
5 Specification
More detailed specifications are as follows:
Table 1 – TMY03 Hardware Specification Table
Specification
Description
Main control chip platform
STM32G070
Communication module
BG96
Cellular Network
GSM: 850/900/1800/1900MHz
Cat M1: LTE FDD: B2/B4/B5/B12/B13/B26
NB1: LTE FDD: B2/B5/B12/B13/B26
Data Transmission
LTE features
Cat M1: 375Kbps DL; 375Kbps UL
Cat NB1: 32Kbps DL; 70Kbps UL
GSM features
EDGE: 296Kbps DL; 236.8Kbps UL
GPRS: 107Kbps DL; 85.6Kbps UL
GPS features
GPS/BDS/Galilleo/GLONASS
Size
80x38x34mm
Weight
100g
Battery capacity
2500mAh@3.8V
IP Level
IP65
Temperature
-20℃～50℃
Humidity
95%RH
Storage temperature
-10℃～45℃
Notes:
1. It is recommended to deploy the equipment to the current network within 3 months after the arrival of the
equipment, or store it in the following environment:
⚫ Temperature: -10～35 ℃
⚫ Relative humidity (RH): 30% RH ~ 85% RH
⚫ The storage environment should be equipped with temperature and humidity instruments and