User's Manual

pg. 5 Copyright © 2019 ThingsMatrix Inc., All Rights Reserved.
⚫ The ideal installation direction of the terminal is that the top cover is facing the sky. To prevent the GNSS
positioning signal from being blocked and unable to be located, it must be ensured that no metal barrier
above the top cover. If the terminal cannot be installed face up due to the limitation of the installation
environment, the top cover can also be installed in the horizontal direction.
⚫ The installation position of the device shall be in the position without radio signal shielding. The
installation surface shall be kept clean and free of oil and dust, which will affect the installation firmness.
⚫ During the installation process, it is possible to trigger the optical sensor and activate the tamper alarm. If
the fixed device is installed first and then turn on the battery switch, the alarm can be avoided.
5 Specification
More detailed specifications are as follows:
Table 1 – TMY02 Hardware Specification Table
Specification
Description
Main control chip platform
STM32G070
Communication module
BG96
Cellular Network
GSM: 850/900/1800/1900MHz
Cat M1/NB1 LTE FDD: B1/B2/B3/B4/B5B8/B12/B13/B18/B19/B20/B26/B28 LTE TDD B39
Data Transmission
LTE features
Cat M1: 375Kbps DL; 375Kbps UL
GSM features
EDGE: 296Kbps DL; 236.8Kbps UL
GPRS: 107Kbps DL; 85.6Kbps UL
GPS features
GPS/BDS/Galilleo/GLONASS
Size
80x38x34mm
Weight
100g
Battery capacity
1950mAh@6V
IP Level
IP65
Temperature
-20℃～60℃
Humidity
95%RH
Storage temperature
-10℃～45℃
Notes:
1. It is recommended to deploy the equipment to the current network within 3 months after the arrival of the
equipment, or store it in the following environment:
⚫ Temperature: -10～35 ℃
⚫ Relative humidity (RH): 30% RH ~ 85% RH
⚫ The storage environment should be equipped with temperature and humidity instruments and
dehumidification equipment to monitor and adjust the temperature and humidity.