User's Manual

PM500 Android 7.1 User Manual

Getting Started

Install and remove SIM and SAM cards

Following steps describe how to install the SIM and SAM cards.

1. Open the battery cover and remove the battery

2. Slide the card holder up and swing upwards to open the holder (Refer to

Figure 10

)

3. Facing down the gold contact of the cards, put the cards in the correct orientation.

4. Put the holder down and slide it down to lock the holder

To remove the cards,

1. Open the card holder

2. Remove the card and slide the holder down to lock it

Figure 10 Open SIM, PSAM slot

Figure 11 SIM, PSAM card orientation