Manualshelf

Installation Guide

ManualsBrandsQuectel ManualsElectronicsLTE Module
11121314151617181920
20
Copyright © 2019 Ribbon Communications Operating Company, Inc (“Ribbon”). All rights reserved.
5
Configuring Basic Network
Settings
This chapter explains how to connect to the EdgeMarc and access the
graphical user interface (GUI) to configure basic network settings for the
first time. Refer to the EdgeMarc VOS User Guide for complete details on
how to configure your EdgeMarc device for your network deployment.
Connecting to the EdgeMarc for the First Time
Deploying the EdgeMarc 6000 uCPE Session Border Controller
Connecting to the EdgeMarc for the First Time
The LAN interface ports are pre-configured with the IP
address
192.168.1.1.
1.
Connect a computer to the LAN interface port (LAN Port 1) using an
Ethernet cable or connect to an Ethernet switch (using the IP address
192.168.1.2 and subnet mask 255.255.255.0).
2.
Launch a web browser on your computer and enter the following URL:
http://192.168.1.1.
3.
Press Return. The EdgeMarc login screen is displayed.
Figure 5-1 EdgeMarc login screen
4.
Enter your initial username in the field provided: root