Installation Guide

16
Copyright © 2019 Ribbon Communications Operating Company, Inc (“Ribbon”). All rights reserved.
MicroSD Card Features and Specifications
Table 3-1 MicroSD Card Features (continued)
Feature Description
Directory Commands
 create = mkdir
 delete = rmdir
 rename = mv
MicroSD Card Commands
 mount = sdcard mount
In FAT32 format if the microSD card (or SD
card) was not properly unmounted, this
command will result in the following syslog
message:
“Volume was not properly unmounted. Some
data may be corrupt. Please run fsck.”
Since EdgeMarc no longer supports dos fsck
tool, this must be fixed either on an EdgeMarc
with pre-15.3.0 VOS or on an appropriate
Windows system.
 unmount = sdcard umount
 format* = sdcard format
Please note that Quick Format is not available in
EdgeMarc versions 15.3.0 and above. A
microSD card of 32 GB can take up to 35
minutes to be formatted.
 name/rename SD card* = sdcard volume
<volume name>
 status* = sdcard check
*Supports only Ext3 file system
EdgeMarc files
You
can
copy
the
following
types
of
files
to
and
from
the microSD card using the CLI: conf1, conf2,
syslog, pcap, mand logs, sys_report output.
TFTP server
The
TFTP
file
server
is
used
for
endpoint
configuration file storage.
FTP server
The
FTP
file
server
is
used
for
endpoint
configuration file storage.
Remote access
SSH into the EdgeMarc 6000 uCPE via SCP for
remote access to the microSD card and files within
the microSD card.
System alerts for
microSD card
insert/removal
A system alert is issued when a microSD card is
inserted or removed. The alert contains the
timestamp of the event.