Installation Guide

12
Copyright © 2019 Ribbon Communications Operating Company, Inc (“Ribbon”). All rights reserved.
Product Overview
Table 2-2 EdgeMarc 6000 uCPE Back Panel LEDs (continued)
LED Indicator Description
T1/E1 (1
-
2)
Off
T1/E1 port is not in use.
Solid
Green
T1/E1 port is in use.
Line (1
-
2)
Off
PSTN line is not in use.
Solid
Green
PSTN line is in use.
Phone (1
-
8)
Off
Phone is in the on
-
hook
state.
Solid
Green
Phone is in the off
-
hook state.
Table 2-3 EdgeMarc 6000 uCPE Back Panel Components
Physical
Label/Type Function Description
Erase button
Erase
Press the Erase button in quick succession to control the
following:
 One click—No action.
 Two clicks—Resets the CLI and GUI password with no
service interruption.
 Three clicks—Restores to factory default settings and
reboots the system.
Note:
When restored to factory default settings, the
current configuration is lost, disconnecting all
VoIP
devices, Internet connectivity, and network access for
computers until the system is reconfigured.
Power Inlet
Accepts
power input
This is a 12V 6A DC power socket.
Power/Status
LEDs
System power
and status
Refer to
Table 2
-
2
for system and power status details.
Ethernet WAN
Ports 1-2
WAN
2x1 10/100/1000 Mbps RJ45 Ethernet ports for WAN
network connectivity (Copper).
SFP Link LEDs
Status
When lit, the SFP port is active and the copper RJ45 port
is inactive.
Refer to Table 2-2.