Installation Guide

11
Copyright © 2019 Ribbon Communications Operating Company, Inc (“Ribbon”). All rights reserved.
Product Overview
When lit, the Power LED indicates
power is applied to the system. The
Status LED changes to indicate the current state of the system.
(
Figure 2-2).
Table 2
-
2 EdgeMarc 6000 uCPE Back Panel LEDs
EdgeMarc 6000 uCPE Back Panel
Figure 2-2 EdgeMarc 6000 uCPE Back Panel
LED Indicator Description
Power
Off
Power is
not supplied to the device.
Troubleshoot by verifying that the power adapter is
connected to the unit and that power is supplied to the AC
wall outlet.
Solid
Green
Power is supplied to the unit.
Status
Off
Power is not supplied to the device, or the
bootloader failed
to load.
Solid
Amber
The device is running a self
-
test and is initializing.
Flashing
Amber
The device is upgrading its software.
Flashing
Green
The device is loading the EdgeMarc VoIP Operating System
(VOS).
Solid
Green
VOS is
ready.
Red
The device is in the bootloader. The kernel will change the
LED to solid amber once the kernel starts loading.
SFP Link
(1-2)
Solid
Green
Peer link is powered.
Flashing
LED
Fiber traffic is active.