Users Manual

Ethernet LAN
ports 1-4
LAN
2x2 10/100/1000 Mbps RJ45 Ethernet ports for LAN network
connectivity.
LTE Micro
SIM Slot
4G LTE
Support
Allows you to insert a 4G LTE micro SIM card thus allowing 4G
network access.
Micro SD
Card
Interface
Storage
Allows the EdgeMarc to save configurations and other files to an
SD High Capacity (SDHC) Version 2.0 card. Maximum storage
capacity is 32 GB per SD card, 4 GB per file. The SD card
capabilities are configured with the web-based configuration menu
and with command-line interface (CLI). Refer to EdgeMarc 6000
MicroSD Card Specifications.
USB 3.0 port
Data
transmission
Can be used to connect USB devices.
T1/E1 LEDs
Status
When lit, the T1/E1 port is active. Refer Table 1.
T1/E1 PRI
ports 1-2
T1/E1
Allows the user to transmit voice and data through PRI. 2 x T1/E1
default system configuration. Two ports are available on the main
board.
Line ports
1-2
FXO
2 x RJ11 ports for 2 FXO channels.
Phone ports
1-8
FXO/FXS
LEDs
Status
Refer to Table 2-2 for FXO/FXS LED status details.
Management
Console
ports
Management
RJ45 serial craft port for console management. This port is used
for debug or diagnostic purposes only.
Primary system configuration is performed from a web browser as
described in the EdgeMarc User Guide.
SMA
Connector
4G LTE
Support
Connectors for LTE antenna.
Ethernet Port LEDs
Figure 3: Ethernet port LEDs
Table 5: Ethernet Port LEDs
Label
Indication
Status
Activity/Link
Page 11
FXS 8 x RJ11 ports for 8 FXS channels.