Users Manual

SFP
Link
(1-2)
Solid
Green
Peer link is powered.
Flashing
LED
Fiber traffic is active.
T1/E1
(1-2)
Off
T1/E1 port is not in use.
Solid
Green
T1/E1 port is in use.
Line
(1-2)
Off
PSTN line is not in use.
Solid
Green
PSTN line is in use.
Phone
(1-8)
Off
Phone is in the on-hook state.
Solid
Green
Phone is in the off-hook state.
Erase button
Erase
Press the Erase button in quick succession to control the following:
One click—No action.
Two clicks —Resets the CLI password with no service
interruption.
Three clicks —Restores to factory default settings and reboots
the system.
Note : When restored to factory default settings, the current
configuration is lost, disconnecting all VoIP devices, Internet
connectivity, and network access for computers until the system is
reconfigured.
Power Inlet
Accepts
power input
This is a 12V 6A DC power socket.
Power/Status
LEDs
System
power and
status
Refer to Table 1 for system and power status details.
Ethernet
WAN ports
1-2
WAN
2x1 10/100/1000 Mbps RJ45 Ethernet ports for WAN network
connectivity (Copper).
SFP Link
LEDs
Status
When lit, the SFP port is active and the copper RJ45 port is
inactive. Refer to Table 1.
Optical WAN
SFP ports
1-2
WAN
Small Form-Factor Pluggable (SFP) for fiber (RJ45) Gigabit
Ethernet connectivity. Either the SFP port (operating at 100/1000
Mbps) or the RJ45 (operating at 10/100/1000 Mbps) port can be
active at a time.
Confidential and
Copyright © 2019 Ribbon Communications Operating Company, Inc. (''Ribbon''). All rights reserved.
Table 4: EdgeMarc 6000 Back Panel Components
Physical
Function Description
Label/Type
Proprietary. Page 10