Users Manual

LTE Standard Module Series
EC200T Series Mini PCIe Hardware Design
EC200T_Series_Mini_PCIe_Hardware_Design 34 / 54
3.10.6. WAKE# Signal
The WAKE# signal is an open collector signal which is similar to RI signal, but a host pull-up resistor and
AT+QCFG="risignaltype","physical" command are required. When a URC returns, a 120ms low level
pulse will be outputted. The state of WAKE# signal is shown as below.
Figure 13: WAKE# Behavior
 AT+CFUN=0, AT+CFUN=4