User's Guide

DTM-02L User’s Guide
Rev.: 1.0
+Update: 23/09/19
Rev. 1.0
Page 12 of 17
This page contains confidential information, which is protected by copyright and is proprietary to DIV
No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV
4.1.1 I/O Connector
The I/O connector is connected to the vehicle via harness calbe and consists of 8+8 pins. The
shape of the connector is shown in the below figure.
Figure ４ I/O Connector