DTM-02L USER’S GUIDE ©All Rights Reserved
DTM-02L User’s Guide Rev.: 1.0 Revision History Revision Issue Date Author Scope 1.0 2019/08/14 Lim.J.H Initial Release +Update: 23/09/19 Rev. 1.
DTM-02L User’s Guide Rev.: 1.0 Contents 1 WARNINGS FOR SAFETY OPERATION ................................................................ 5 2 INTRODUCTION ...................................................................................................... 8 3 OVERVIEW .............................................................................................................. 9 3.1 Components ..........................................................................................................
DTM-02L User’s Guide Rev.: 1.0 Figure FIGURE １ LIN-Q SYSTEM .................................................................................................................................. 8 FIGURE ２ DTM-02L TERMINAL ........................................................................................................................ 9 FIGURE ３ DTM-02L TERMINAL ......................................................................................................................
DTM-02L User’s Guide Rev.: 1.0 1 Warnings for safety operation This is to protect your safety and property. Please read this manual carefully before using. Operational Environment - The operating voltage of this products is between 9Vdc and 34Vdc. Please use the specified operating volgage. - Use within the specified temperature range. - This product is specialized for industrial vehicles. Insallation Precaustions - Insallation and wiring require professional skills.
DTM-02L User’s Guide Rev.: 1.0 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC notification to users This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules.
DTM-02L User’s Guide Rev.: 1.0 IC Information This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.” Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
DTM-02L User’s Guide Rev.: 1.0 2 Introduction The DTM-02L is a product to the Doosan Lin-Q system. This product is an IoT(Internet of Things) terminal that can be used anywhere in the world by using LTE communication networks or WIFI communication networks. User can access the Lin-Q system and this product after registrationin on the Lin-Q homepage or by contacting the administrator. Below is the Lin-Q system diagram. Figure １ Lin-Q System +Update: 23/09/19 Rev. 1.
DTM-02L User’s Guide Rev.: 1.0 3 Overview 3.1 Components DTM-02L is composed of the following components. It is required that separate harness cable assembly for the connection with the vehicle. DTM-02L Figure ２ DTM-02L Terminal +Update: 23/09/19 Rev. 1.
DTM-02L User’s Guide Rev.: 1.0 3.3 Features LTE communication, support Global Optimized functions for industrial vehicles CAN data collection function Vairous sensor data collection function of vehicle Periodic transmission function for collected data Non periodic event data transfer function Shock detection function Firmware over the air function.
DTM-02L User’s Guide Rev.: 1.0 4 Hardware Descriptions 4.1 DTM-02L The name of each part of the terminal is as follows. Figure ３ DTM-02L Terminal The following table shows the specifiations of each parts.
DTM-02L User’s Guide Rev.: 1.0 4.1.1 I/O Connector The I/O connector is connected to the vehicle via harness calbe and consists of 8+8 pins. The shape of the connector is shown in the below figure. Figure ４ I/O Connector +Update: 23/09/19 Rev. 1.
DTM-02L User’s Guide Rev.: 1.0 The below table shows the description of the each pin.
DTM-02L User’s Guide Rev.: 1.0 4.1.2 Status LED DTM-02L displays the status of the terminal with LED. The LED is composed of four, and the status of the terminal according to the color is shown in the following table. Figure ５ Status LED No.
DTM-02L User’s Guide Rev.: 1.0 5 How To Use Be sure to read the following instructions before using. 5.1 User Registration User registration is required to use this product. In order to registration, please contact to your sales office or visit the “https:// lin-q.doosaniv.com”. For more detailed information, please reefer to the Lin-Q user’s guide. 5.2 LTE Mode Operation In order to operate the terminal in lte mode, it must be subscribed to LTE communication service.
DTM-02L User’s Guide Rev.: 1.0 6 Specifications 6.1 DTM-02L Item Specification ø117.7(D) x 31(H) [mm] [Unit: mm] Size Weight 204 grams Operating Temperature -30℃ ~ +70℃ Storage Temperature -40℃ ~ +85℃ Vibration Thermal Shock Humidity Communication Random 5~20Hz 0.05g2/Hz, 20~150Hz: -3dB/oct.(1.7g rms), 3-axis, 30minutes for each axis. -40℃(1H)/+85℃(1H), 1cycle- Total24 cycle, 48H, non-operating +70℃/95%/48 Hours, Operating LTE LTE Data Modem(LTE Cat4, Worldwide) BT nRF52810, Bluetooth 5.
DTM-02L User’s Guide Rev.: 1.0 7 Limited Warranty This product is manufactured through strict quality control and inspection process. In the event of a malfunction in normal use by the customer, the Service Center will repair it free of charge during the warranty period (one year from the date of purchase). Even within the warranty period, the following cases will be charged for repair.
