Hardware Design V1.0
Table Of Contents
- About the Document
- Contents
- Table Index
- Figure Index
- 1 Introduction
- 2 Product Concept
- 3 Application Functions
- 4 Antenna Interface
- 5 Electrical, Reliability and Radio Characteristics
- 6 Mechanical Dimensions
- 7 Storage and Manufacturing
- 8 Appendix A Reference
NB-IoT Module Series
BC95 Hardware Design
BC95_Hardware_Design Confidential / Released 33 / 45
Table 20: Antenna Requirements
Type
Requirements
Frequency Range
791-960MHz
VSWR
≤2
Gain (dBi)
≥1
Max Input Power (W)
5
Input Impedance (Ω)
50
Polarization Type
linear
4.6. RF Cable Soldering
Soldering the RF cable to RF pad of module correctly will reduce the loss on the path of RF, please refer
to the following example of RF cable soldering.
Figure 21: Recommended RF Cable Soldering
Quectel
Confidential