Getting Started Guide

3 | Rev. 0.4
Troubleshooting
Record Device Information
Record the following information for activation and for your records:
» Device Product Name (see image of label below)
» Device Model Name (see image of label below)
» Device SN/IMEI (see image of label below)
» Device ICCID (if available)
Pre-installation
Recommended tools and supplies for installation
Basic Tools:
• Wire Strippers
• Connector Crimping Tool
• Panel Removal Tool
• Digital Multimeter (DMM)
• T-10S Torx Screwdriver
Basic Supplies:
• Ring Terminals
• Cable Zip-Ties
• Electrical Tape
• Spare Fuses (3 Amp)
• Self-Tapping Screws
Symptom Action
LED slow flashes a repeated pattern of LED
flashes after supplying power to the device
The device is in error state; check the error codes
above for corresponding actions
LED doesn’t not illuminate after supplying power to
the device.
Replace the device