Getting Started Guide

2 | Rev. 0.4
LED
The LED indicate device activity at start-up and its live functional status.
Powering on the Device
1. Harness the device with external 12V power supply (typically with the vehicle).
2. A power LED will illuminate when the system starts. The device will initiate a set of start-up activities (see
start-up sequence LED behavior below).
Error Codes
LED Color Flash Count Error
1 SIM Error
2 No Network
Green 3 Unable to re
g
ister with network
5 Service activation error
6 Service s
y
nc failure
Blue 3 GPS si
g
nal too weak
4 Batter
y
too low to transmit
Red 5 Error readin
g
telematics data
10 Other s
y
stem error
Blue Green Red
O
ff
GPS Off
Modem Off
Device off or sleeping
On
GPS has location fix Connected to cellular network System is awake
Rapid Flash
Receiving GPS location Transferring cellular data
Telematics transferring data (if
Medium Flash
Searchin
g
for satellites Searchin
g
for cellular network Device unlocked
(
3 sets of 4
)