Installation Manual
6 7
INTRODUCTION INTRODUCTION
Power LED (Red):
• OFF - No power supply.
• Double blink - powered and working.
• Rapid blinking - key off.
CAN-BUS LED (green):
• Off: CAN-BUS signal not available.
• Solid On: can messages received from at least one line.
MODEM LED (green):
• Off: Modem initialization phase. No network coverage or device in standby/wake mode.
• Slow Blink: GSM networks detected.
• Fast Blink: Device connected to the network, and ready to communicate with the server.
• On solid: GSM communication ongoing.
GPS LED (green):
• Off: GPS initialization phase or device in standby/wake mode.
• Blinking: Searching for GPS signal.
• On solid: GPS x completed.
AM35 LED DISPLAY PANEL
AM35 MAIN ENVELOPE DIMENSIONS
Specic scenarios
BOOT: All leds are lights up for the boot time
FACTORY LOOP: Power LED (red) xed on and three green LEDs are OFF. At Key off, the device goes to
hibernate, and every LEDs will be OFF.