Installation Manual
12 13
INSTALLATION
INSTALLATION SPECIFICATIONS
NOTICE - If the device is not properly installed, any
motion detected by the internal accelerometer will have
a negative impact. False readings will occur unless the
device is rmly in place.
WARNING - DO NOT ALLOW the CM1X or the
components of the telematic system to BLOCK or LIMIT
your view outside the cab.
Use goggles when drilling, cutting, or grinding on the
machine.
WARNING - To avoid the effects of human exposure
to electromagnetic elds, the device must be installed
at a minimum distance of 20 cm from the vehicle
operator/driver.
Type Fixed
Means Bolt M6
Max Torque 5Nm
Maximum gain: 1 dBi
Minimum distance from user: 20 cm from antenna apparatus
Characteristic impedance: 50 Ohm
7. Connect the vehicle battery.
6. Connect the antenna cables (CM110 only).
INSTALLATION